ジャーナル/Journal Articles

2026

1. V. Söderberg, R. Tomkowski, T. Kizaki, Y. Liao, A. Archenti, “In situ- On Machine – Post Process Metrology System Design for Machining System Characterization,” Journal of Machine Engineering, Jan. 2026.
2. J. Han, L. Wang, X. Li, T. Kizaki, N. Sugita, D. Wang, “Condition-adaptive spindle thermal error prediction and compensation using Temporal Kolmogorov–Arnold Networks with hybrid feature selection,” Case Studies in Thermal Engineering, 77, 107564, Jan. 2026.

2025

1. J. Liu, T. Kizaki, Y. Liao, Y. Kambe, N. Sugita, “Health monitoring for abnormal clogging problems in industrial pipeline systems with multiple vibration measurements,” Measurement, Dec. 2025.
2. S. Tanaka, T. Kizaki, Y. Teshima, N. Sugita, “Comprehensive Analysis of Temperature-Sensitive Points Across Machine Tool Structures Using Highly Redundant Temperature Data and Sparse Modeling,” International Journal of Automation Technology, Sep. 2025.
3. L. Weng, T. Kizaki, C. Ma, W. Gao, D. Kono, “A review of robust thermal error reduction of machine tools,” International Journal of Machine Tools and Manufacture, 209, 104298, Jun. 2025.
4. C. Wang, Z. Fang, T. Kizaki, N. Sugita, “Towards understanding the machining effect on the additively manufactured stainless steel for various scanning directions: Texture evolution and mechanical properties,” Materials & Design, 113776, Feb. 2025.
5. T. Bai, C. Wang, G. Yu, M. Kolmanovskyi, J. Saelzer, T. Kizaki, D. Biermann, Z. Fang, “Towards understanding the surface strengthening mechanism in negative rake angle cutting of additively manufactured stainless steel,” CIRP Annals, 74(1), pp.77-80, 2025.
6. S. Nakamura, K. Nakanishi, K. Ohara, Y. Nakamura, C. Wang, J. Liu, S. Tanaka, T. Kizaki, N. Sugita, “Improvement of surface roughness in simultaneous two turrets turning with low-frequency vibration,” JAMDSM, 19(1), JAMDSM0006, 2025.

2024

1. Y. Teshima, S. Tanaka, T. Kizaki, N. Sugita, “Sensor placement strategy based on reduced-order models for thermal error estimation in machine tools,” CIRP Journal of Manufacturing Science and Technology, 55, pp.403-410, Dec. 2024.
2. C. Wang, T. Kizaki, K. Nagato, Z. Ren, N. Sugita, “Velocity plane-based analytical modeling for reconstructing temperature field at tool-chip/work interface,” Precision Engineering, 88, pp.177-191, Jun. 2024.
3. Z. Ren, Z. Fang, T. Arakane, T. Kizaki, Y. Feng, T. Nagata, Y. Komatsu, N. Sugita, “Chipping analysis and prediction in gear skiving process using multi-infeed strategy,” Mechanical Systems and Signal Processing, Apr. 2024.

2023

1. S. Nakamura, K. Nakanishi, K. Ohara, Y. Nakamura, Z. Ren, T. Kizaki, N. Sugita, “Tool design for low-frequency vibration cutting on surface property,” Frontiers in Manufacturing Technology, 2, Jan. 2023.
2. S. Tanaka, T. Kizaki, K. Tomita, S. Tsujimura, H. Kobayashi, N. Sugita, “Robust thermal error estimation for machine tools based on in-process multi-point temperature measurement of a single axis actuated by a ball screw feed drive system,” Journal of Manufacturing Processes, 85, pp.262-271, Jan. 2023.

2022

1. J. Liu, T. Kizaki, Z. Ren, N. Sugita, “Mode shape database-based estimation for machine tool dynamics,” International Journal of Mechanical Sciences, 107739, Sep. 2022.
2. Z. Fang, Z. Ren, T. Kizaki, Y. Feng, T. Nagata, K. Tomiyama, N. Sugita, “Towards understanding subsurface integrity alteration of gear fillet formed by gear skiving method,” Materials and Design, 110708, May 2022.
3. T. Inoue, T. Kizaki, N. Sugita, “Structural components with sensing capability of three-dimensional temperature distribution for thermal deformation prediction,” Precision Engineering, 75, pp.153-166, May 2022.
4. Z. Fang, Z. Ren, T. Kizaki, N. Sugita, “Interference-based technique for designing cutter flank using multiple radial infeed in gear skiving,” Mechanism and Machine Theory, 169, 104678, Mar. 2022.
5. T. Kizaki, Q. Zheng, L. Shu, J. Tanaka, T. Katsuma, “On reduction of energy flow into workpiece in continuous generating grinding,” CIRP Annals, 2022.
6. Z. Fang, Z. Ren, T. Kizaki, Y. Feng, J. Kugo, Y. Komatsu, N. Sugita, “Construction of uncut chip geometry in gear skiving using level contours,” Precision Engineering, 73, pp.93-103, Jan. 2022.
7. Z. Ren, Z. Fang, T. Kizaki, Y. Feng, T. Nagata, Y. Komatsu, N. Sugita, “Understanding local cutting features affecting surface integrity of gear flank in gear skiving,” International Journal of Machine Tools and Manufacture, 172, 103818, Jan. 2022.

2021

1. S. Li, L. Shu, T. Kizaki, W. Bai, M. Terashima, N. Sugita, “Cortical bone drilling: A time series experimental analysis of thermal characteristics,” Journal of Manufacturing Processes, 64, pp.606-619, Apr. 2021.
2. Z. Ren, Z. Fang, T. Arakane, T. Kizaki, T. Nishikawa, Y. Feng, J. Kugo, E. Nabata, N. Sugita, “Parametric modeling of uncut chip geometry for predicting crater wear in gear skiving,” Journal of Materials Processing Technology, 290, Apr. 2021.
3. L. Shu, S. Li, Z. Fang, T. Kizaki, K. Kimura, G. Arai, K. Arai, N. Sugita, “Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with improved cutting mechanism,” Composites Part A, 142, Mar. 2021.
4. J. Zhang, J. Ding, N. Sugita, T. Kizaki, Q. Li, Q. Ding, L. Wang, “A sample construction method in kinematics characteristics domain to identify the feed drive model,” Precision Engineering, 68, pp.82-96, Mar. 2021.
5. T. Kizaki, S. Tsujimura, Y. Marukawa, S. Morimoto, H. Kobayashi, “Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply,” CIRP Annals, 70(1), pp.325-328, 2021.
6. T. Kizaki, K. Takahashi, T. Katsuma, L. Shu, N. Sugita, “Prospects of dry continuous generating grinding based on specific energy requirement,” Journal of Manufacturing Processes, 61, pp.190-207, Jan. 2021.
7. T. Kizaki, K. Takahashi, T. Katsuma, J. Tanaka, L. Shu, N. Sugita, “Effect of grinding fluid supply on workpiece temperature in continuous generating grinding,” Journal of Manufacturing Processes, 60, pp.410-417, Dec. 2020.

2020

1. T. Kizaki, J. Zhang, Q. Yao, J. Yanagimoto, “Continuous manufacturing of CFRP sheets by rolling for rapid fabrication of long CFRP products,” Composites Part B: Engineering, 189, May 2020.
2. Z. Ren, Z. Fang, G. Kobayashi, T. Kizaki, N. Sugita, T. Nishikawa, J. Kugo, E. Nabata, “Influence of tool eccentricity on surface roughness in gear skiving,” Precision Engineering, 63, pp.170-176, May 2020.
3. J. Zhang, T. Taylor, T. Kizaki, J. Yanagimoto, “Bendable metal-based composite sheets with a truncated dome core made of carbon fibre reinforced thermoplastics,” Composite Structures, 236, Mar. 2020.
4. T. Kizaki, Y. Hao, T. Ohashi, T. Kokubo, T. Nishijima, “Capability of a grinding wheel reinforced in hoop direction with carbon fiber,” CIRP Annals, 69(1), pp.285-288, 2020.

2019

1. T. Kizaki, T. Katsuma, M. Ochi, R. Fukui, “Direct observation and analysis of heat generation at the grit-workpiece interaction zone in a continuous generating gear grinding,” CIRP Annals, 68(1), pp.417-422, 2019.
2. H. Karasawa, T. Yoshida, R. Fukui, T. Kizaki, K. Fujii, S. Warisawa, “Analysis of chip shape distribution using image processing technology to estimate wearing condition of gear grinding wheel,” Procedia CIRP, 81, pp.381-386, 2019.

2018

1. Y. Ito, R. Shinomoto, K. Nagato, A. Otsu, K. Tatsukoshi, Y. Fukasawa, T. Kizaki, N. Sugita, M. Mitsuishi, “Mechanisms of damage formation in glass in the process of femtosecond laser drilling,” Applied Physics A, 124(2), Feb. 2018.
2. T. Kizaki, T. Fujii, M. Iwama, M. Shiraishi, N. Sugita, S. H. Ahn, “Design of a CFRP-elastomer composite with high stiffness and damping capability,” CIRP Annals, 67(1), pp.413-418, 2018.

2017

1. Y. Ito, N. Sugita, T. Fujii, T. Kizaki, M. Mitsuishi, “Precision machining of sintered zirconia ceramics by high-speed milling,” International Journal of Automation Technology, 11(6), pp.862-868, Nov. 2017.
2. Y. Kim, K. Hibino, T. Kizaki, N. Sugita, M. Mitsuishi, “Simultaneous interferometric measurement of the absolute thickness and surface shape of a transparent plate,” Precision Engineering, 48, pp.347-351, Apr. 2017.
3. T. Kizaki, Y. Ito, N. Sugita, M. Mitsuishi, “Laser-assisted milling of zirconia with systematically determined machining conditions,” International Journal of Automation Technology, 11(2), pp.258-269, Mar. 2017.
4. Y. Ito, T. Kizaki, R. Shinomoto, M. Ueki, N. Sugita, M. Mitsuishi, “High-efficiency and precision cutting of glass by selective laser-assisted milling,” Precision Engineering, 47, pp.498-507, Jan. 2017.
5. N. Sugita, L. Shu, T. Shimada, M. Oshima, T. Kizaki, M. Mitsuishi, “Novel surgical machining via an impact cutting method based on fracture analysis with a discontinuum bone model,” CIRP Annals, 66(1), pp.65-68, 2017.

2016

1. R. Shinomoto, Y. Ito, T. Kizaki, K. Tatsukoshi, Y. Fukasawa, K. Nagato, N. Sugita, M. Mitsuishi, “Experimental analysis of glass drilling with ultrashort pulse lasers,” International Journal of Automation Technology, 10(6), pp.863-873, Nov. 2016.
2. T. Kizaki, N. Sugita, M. Mitsuishi, “Experimental analysis of the machinability in the thermally assisted milling process of zirconia ceramics,” Precision Engineering, 45, pp.176-186, Jul. 2016.

2014

1. T. Kizaki, T. Ogasahara, N. Sugita, M. Mitsuishi, “Ultraviolet-laser-assisted precision cutting of yttria-stabilized tetragonal zirconia polycrystal,” Journal of Materials Processing Technology, 214(2), pp.267-275, 2014.
2. T. Kizaki, K. Harada, M. Mitsuishi, “Efficient and precise cutting of zirconia ceramics using heated cutting tool,” CIRP Annals, 63(1), pp.105-108, 2014.

2013

1. T. Kizaki, Y. Ito, N. Sugita, M. Mitsuishi, “Development of laser-assisted machining of yttria-stabilized tetragonal zirconia polycrystal,” Transactions of the JSME, Series C, 79(808), pp.4582-4592, 2013.

2012

1. N. Sugita, T. Kizaki, D. Kanno, N. Abe, Y. Yokoyama, T. Ozaki, M. Mitsuishi, “A portable arthroscopic diagnostic probe to measure the viscoelasticity of articular cartilage,” Journal of Robotics and Mechatronics, 24(5), pp.782-790, Oct. 2012.

国際会議/International Conferences

2025

1. S. Ando, S. Tanaka, Y. Teshima, T. Kizaki, J. Morishita, “Strategy for sensor placement to estimate thermal errors using temperature-sensitivity distribution based on a reduced-order model of machine tools,” 4th International Conference on Thermal Issues in Machine Tools, Jun. 2025.
2. T. Saito, C. Wang, T. Kizaki, “Enhancing cooling efficiency of WC-Co cemented carbides cutting tools with lattice structures fabricated by 3D printing,” Euspen 25th International Conference & Exhibition, Jun. 2025.

2024

1. H. Ren, T. Kizaki, H. Kamura, T. Nishizawa, C. Wang, N. Sugita, “Direct observation of the clogging development during the grinding process,” The 20th International Conference on Precision Engineering (ICPE2024).
2. J. Liu, S. Tanaka, Y. Liao, K. Nakanishi, S. Nakamura, T. Kizaki, N. Sugita, “Experimental study on temperature-dependent spindle vibration analysis with in-process measurements,” ICPE2024.
3. T. Kizaki, S. Ando, Y. Teshima, S. Tanaka, N. Sugita, “Possibility of large-scale array of temperature sensors interconnected in series for smart manufacturing,” PRESM2024 (Invited).
4. Y. Liao, J. Liu, T. Kizaki, K. Nagato, M. Nakao, N. Sugita, “Vibrational Monitoring and Analysis of Tool Wear Mechanism in High-Speed Micro-Grinding,” ASPEN 10th.
5. S. Tanaka, Y. Teshima, T. Kizaki, K. Tomita, N. Sugita, “Thermal Error Estimation of Machine Tools by Data-Fit Models Based on Multi-Point Temperature Sensor,” ASPEN 10th.

2023

1. J. Liu, Y. Liao, Z. Ren, T. Kizaki, N. Sugita, “Experimental Study on the Relationship Between Tool Wear and High-Frequency Vibration in Ceramic Grinding,” 17th International Conference High Speed Machining (HSM 2023).
2. H. Ren, T. Kizaki, T. Katsuma, N. Sugita, “Simulation of Continuous Generating Gear Grinding,” 11th CIRP Global Web Conference (CIRPe 2023).
3. Y. Teshima, S. Tanaka, T. Kizaki, K. Tomita, S. Tsujimura, N. Sugita, “Robust estimation of thermal displacement using an array of temperature sensors and a reduced order model,” LEM&P2023.
4. C. Wang, T. Kizaki, Z. Ren, N. Sugita, “Fabrication of an intelligent cutting tool for in-situ temperature monitoring using fused deposition modelling technology,” LEM&P2023.

2022

1. S. Tanaka, T. Kizaki, A. Arimoto, N. Hashimoto, S. Irako, Y. Teshima, K. Iijima, T. Uwano, N. Sugita, “High-speed high-accuracy thermal displacement measurement of machine tools using optical frequency comb ranging,” ICPE2022.
2. T. Kizaki, Q. Zheng, L. Shu, J. Tanaka, T. Katsuma, “On reduction of energy flow into workpiece in continuous generating grinding,” 71st CIRP General Assembly.
3. S. Tanaka, T. Kizaki, K. Tomita, S. Tsujimura, H. Kobayashi, N. Sugita, “Direct Observation of Temperature Distribution in Ball Screw Feed Drive System Using Wireless Multi-Point Series Temperature Measurement,” 55th CIRP Conference on Manufacturing Systems.
4. J. Liu, T. Kizaki, S. Yamaura, N. Sugita, “Database for Machine Tool and its Application in Estimating System Dynamics,” MSEC 2022.
5. Q. Zheng, T. Kizaki, L. Shu, J. Tanaka, T. Katsuma, N. Sugita, “Dry continuous generating grinding based on specific energy and heat partition ratio,” LEM21.

2021

1. S. Tanaka, Y. Marukawa, T. Kizaki, K. Tomita, S. Tsujimura, D. Noda, H. Kobayashi, N. Sugita, “Development of a robust and real-time thermal deformation prediction system for machine tool by multi-point temperature measurement,” IMECE2021.
2. T. Kizaki, S. Tsujimura, Y. Marukawa, S. Morimoto, H. Kobayashi, “Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply,” 70th CIRP General Assembly.

2020

1. T. Kizaki, M. Iwama, M. Shiraishi, N. Sugita, “Development of a machining center structure made of carbon fiber reinforced plastic and aluminum honeycomb,” LEMP2020.
2. T. Kizaki, Y. Hao, T. Ohashi, T. Kokubo, T. Nishijima, “Capability of a grinding wheel reinforced in hoop direction with carbon fiber,” 2020 CIRP General Assembly.

2019

1. Y. Ikemoto, T. Kizaki, L. Shu, K. Sekine, M. Ochi, T. Katsuma, N. Sugita, “Thermal Simulation for evaluation of cooling efficiency in continuous generating gear grinding,” ASPEN2019.
2. T. Kizaki, T. Katsuma, M. Ochi, R. Fukui, “Direct observation and analysis of heat generation at the grit-workpiece interaction zone in a continuous generating gear grinding,” 2019 CIRP General Assembly.
3. H. Karasawa, T. Yoshida, R. Fukui, T. Kizaki, K. Fujii, S. Warisawa, “Analysis of Chip Shape Distribution Using Image Processing Technology to Estimate Wearing Condition of Gear Grinding Wheel,” 52nd CIRP-CMS.
4. Z. Ren, Z. Fang, G. Kobayashi, T. Kizaki, T. Nishikawa, J. Kugo, E. Nabata, N. Sugita, “The influence of tool eccentric error on the surface roughness of gear teeth in power skiving,” 17th ICPE.

2018

1. T. Kizaki, T. Fujii, M. Iwama, M. Shiraishi, N. Sugita, S. H. Ahn, “Design of a CFRP-elastomer composite with high stiffness and damping capability,” 2018 CIRP General Assembly.
2. T. Kizaki, T. Fujii, M. Iwama, N. Sugita, “Design Method of CFRP-Elastomer Composite for Structure of Machine Tools,” MSEC 2018.

2017

1. N. Sugita, L. Shu, T. Shimada, M. Oshima, T. Kizaki, M. Mitsuishi, “Novel surgical machining via an impact cutting method based on fracture analysis with a discontinuum bone model,” 2017 CIRP General Assembly.

2016

1. L. Shu, N. Sugita, T. Shimada, K. Yamamoto, T. Kizaki, M. Mitsuishi, “Design and Experimental Analysis of Step Drills Aiming Orthopedic Surgery,” 31st ASPE Annual Meeting.
2. T. Kizaki, Y. Ito, S. Tanabe, Y. Kim, N. Sugita, M. Mitsuishi, “Laser-assisted machining of zirconia ceramics using a diamond bur,” 18th ISEM.

2015

1. Y. Ito, T. Kizaki, T. Fujii, Y. Yuasa, N. Sugita, M. Mitsuishi, “Precision Machining of Yttria-stabilized Tetragonal Zirconia Polycrystal by High-speed Milling,” 30th ASPE Annual Meeting.
2. Y. Ito, T. Kizaki, N. Sugita, M. Mitsuishi, “Numerical Modeling of Picosecond Laser Drilling of Glass,” LEM21 (2015).

2014

1. T. Kizaki, K. Harada, M. Mitsuishi, “Efficient and precise cutting of zirconia ceramics using heated cutting tool,” 2014 CIRP General Assembly.
2. T. Kizaki, T. Kitaguchi, N. Sugita, M. Mitsuishi, “Effect of machining parameters on precision machining of zirconia ceramics using heated cutting tools,” 14th euspen International Conference.

受賞/Awards

2025

• 日本機械学会 生産加工・工作機械部門 優秀講演論文表彰（2024年度）, 日本機械学会
  Yudai Aizawa, Toru Kizaki, Yuta Teshima, Kenichi Tomita, Naohiko Sugita
• 優秀論文表彰特別賞, 公益財団法人マザック財団
  Yuta Teshima, Shun Tanaka, Toru Kizaki, Naohiko Sugita

2023

• ベストプレゼンテーション賞（2023年度秋季大会）, 精密工学会
  神戸 悠, 木崎 通, 劉 佳慧, 長藤 圭介, 中尾 政之
• 優秀論文表彰, 公益財団法人マザック財団
  Shun Tanaka, Toru Kizaki, Kenichi Tomita, Shinji Tsujimura, Hisashi Kobayashi, Naohiko Sugita
• 日本機械学会 生産加工・工作機械部門 優秀講演論文表彰（2023年度）
  Yuta Teshima, Shun Tanaka, Toru Kizaki, Kenichi Tomita, Shinji Tsujimura, Naohiko Sugita

2022

• 優秀論文表彰, 公益財団法人マザック財団
  Shun Tanaka, Toru Kizaki, Naohiko Sugita
• 日本機械学会奨励賞（研究）, 一般社団法人 日本機械学会
• 日本機械学会 生産加工・工作機械部門 優秀講演論文表彰（2022年度）
  Shun Tanaka, Toru Kizaki, Naohiko Sugita

2021

• Young Researcher Award, JSPE
  Toru Kizaki
• 日本機械学会 生産加工・工作機械部門 優秀講演論文表彰（2021年度）
  Toru Kizaki, Atsuki Yanagi, Naohiko Sugita

2020

• 日本機械学会 生産加工・工作機械部門 優秀講演論文表彰（2020年度）
  Toru Kizaki, Yuto Matsumoto, Naohiko Sugita
• ISFA2020 Best Paper Award
  Toru Kizaki, Zeping Wang, Yoshikazu Tanaka, Atsuki Yanagi, Naohiko Sugita

2019

• 日本機械学会 若手優秀講演フェロー賞, 一般社団法人 日本機械学会
  木崎 通

2018

• 砥粒加工学会 学術奨励賞, 砥粒加工学会
  木崎 通

2017

• 精密工学会 研究奨励賞, 公益社団法人 精密工学会
  木崎 通
• 精密工学会 ベストオーサー賞, 公益社団法人 精密工学会
  木崎 通

2014

• 東京大学 工学系研究科長賞（博士）, 東京大学大学院工学系研究科
  木崎 通

2013

• 精密工学会 2013年度 春季大会学術講演会 ベストプレゼンテーション賞, 公益社団法人 精密工学会
  木崎 通

2011

• 東京大学 工学系研究科長賞（修士）, 東京大学大学院工学系研究科
  木崎 通